Royal Anchor also manufactures other concrete anchor bolt configurations including T-Welded at the bottom, Plate Welded at the bottom, Pipe welded along with stiffener for extra support.

Royal Anchor manufactures custom J bend foundation bolts from Dia M12 – M80” diameter to virtually any specification. These bolts are provided in either plain finish or hot-dip galvanized finish. All bolts are manufactured In the following grades Gr 4.6 ( Raw Material used is IS2062 or SAE 1018 ), Gr 8.8 and Gr 10.9. The bent portion, or “leg”, of the anchor bolt serves to create resistance so that the bolt does not pull out of the concrete foundation when force is applied.

Royal Anchor manufactures custom L bend foundation bolts from Dia M12 – M80” diameter to virtually any specification. These bolts are provided in either plain finish or hot-dip galvanized finish. All bolts are manufactured In the following grades Gr 4.6 ( Raw Material used is IS2062 or SAE 1018 ), Gr 8.8 and Gr 10.9. The bent portion, or “leg”, of the anchor bolt serves to create resistance so that the bolt does not pull out of the concrete foundation when force is applied.

A very popular bolts types of foundation bolts, the plate type foundation bolt comes with a housing plate on one end and heavy-duty threadings on the other end. This is popularly used in the construction industry.In addition to these, you can also find application-specific foundation bolts made out of various materials. If you are looking for Bent, Rag or Lewis foundation bolts, it might be hard to come across vendors who provide you with the customisability or service excellence we offer at Royal Anchors

Brace Rod consists of Larger lengths, hence the practice followed at Royal Anchor consists of two rods with a Connector in the middle threaded at each end. For this assembly, A Connector is assembled between the two rods and the assembly is drawn tight by rotating the turnbuckle. Occasionally, Brace rod assemblies are connected using sleeve nuts.Sag & Brace rods are commonly manufactured using low carbon steel, but higher strength assemblies can be manufactured. Carbon or alloy steel sag rod assemblies can be supplied either plain finish, Electro plated or hot-dip galvanized, Complete Sag rod packages are assembled in our facility to ensure accurate thread fit before shipping to your jobsite.

Royal Anchor manufactures Sag rod assemblies in many different specifications and sizes as per customer requirement. The configuration consists of a single rod with threading at both ends. A Sag rod assembly is used to brace steel columns or heavy timber beams or used to support canopies and awnings. Sag & Brace rods are commonly manufactured using low carbon steel, but higher strength assemblies can be manufactured. Carbon or alloy steel sag rod assemblies can be supplied either plain finish, Electro plated or hot-dip galvanized, Complete Sag rod packages are assembled in our facility to ensure accurate thread fit before shipping to your jobsite.

A Connector is assembled between the two rods and the assembly is drawn tight by rotating the connector. Brace rod assemblies are connected using these Connectors.

Hillside washers are used to evenly distribute load in cross bracing applications. Diagonal Sag rods are frequently used to support wall columns and steel beams in metal building construction. The outer curved surface allows for a nut be tightened at a variety of angles. This helps to reduce installation time and field adjustments.Hill Side Washers Stocked at Royal Anchors M16, M20, M24 & M32 In Self Finish

Royal Anchor also manufactures other concrete anchor bolt configurations including T-Welded at the botton, Plate Welded at the bottom, Pipe welded along with stiffner for extra support.

Royal Anchor also manufactures other concrete anchor bolt configurations including T-Welded at the botton, Plate Welded at the bottom, Pipe welded along with stiffner for extra support.

Royal Anchor also manufactures other concrete anchor bolt configurations including T-Welded at the bottom, Plate Welded at the bottom, Pipe welded along with stiffener for extra support.